Germany Technology China Made Wood Pellet Granulator
|FOB Price:||US $30,000 / Set|
|Min. Order:||1 Set|
|Min. Order||FOB Price|
|1 Set||US $30,000/ Set|
|Transport Package:||Export Standard Package|
|Payment Terms:||L/C, T/T, Paypal, Western Union|
- Model NO.: MZLH420
- Voltage: 380V
- Controlling Mode: Electric
- Certification: CE, ISO
- Customized: Customized
- Color: Multi Color
- Ring Die: 420mm
- Main Power: 110kw 8grade
- Force Feeding Motor: 1.5kw
- Pellet Density: 1.1-1.4G/Cm3
- Leadtime: 10days
- Specification: 3000kgs
- HS Code: 847480
- Type: Pellet Granulator
- Automatic Grade: Automatic
- Energy Saving: Energy Saving
- Warranty: 2 Years
- Condition: New
- Trade Mark: Jlne Pellet Granulator
- Roller: 2PCS
- Feeding Motor: 1.1kw
- Final Pellet: 6/8/10mm
- Free Spare Parts: Yes
- Trademark: JLNE Pellet Granulator
- Origin: China
Our wood pellet granulator has been sold to over 20countries all over the world,our machine with CE certificate,final pellet from our machine strictly follow EN standard.
Introduction our Pellet Granulator:
|MZLH420 wood pellet granulator|
|Technical data||1.capacity 0.8~1.4t/h|
3.main power 90/110kw
4.inner diameter of ring die 420mm
|Special from us||1.CE approved,gear-driving|
2.famous brand motor,imported bearing from Sweden
3.equip hoisting lift,since ring die need to change every 2or3months,this tool is helping to make work easily.
4.freely lubrication system on our pellet granulator body,adding oil or grease is more convenience.
5.pellets cutting mechanism
6.with over-load protection system,protecing during machine's working
7.force-feeding part in SS material,after years working the body still in good condition.
8.using double-shaft feeding on top of pellet granulator,so material will not stuck easily.
9.connect itself with cooling system,to reduce heat during granulator working,prolong its service life.
|7working days in standard specification,15~20working days if customized.|
|in export standard,if FCL in nude,if LCL,in strong plywood case.|
|one 20'ft container load 3sets MZLH420 pellet mill,40'ft container load 5sets|
|2years except spare parts|
|Wood pellets are an efficient source of heat with high combustion vablue,like pine is 4300-4500KA,olive wood will be 4500ka and straws are 3700-3800.|
|Wood pellets are economically competitive with home fossil fuel options and electric heat.|
|Wood pellets are a sustainable fuel source,the ash producing is lower than coal and log/firewood,except rice straws pellets(max8%),the other will be lower to 0.9%.|
Wood pellets are a biomass product made of wood waste or other forest waste.
The raw materials can be waste pallets,veneer,branches,debarks and so on.
|Wood pellets can be used in a lot of appliances such as stoves, furnaces, boilers and other heating systems.|
Useful tips for running pellet granulator
About the Compression Ratio of the ring die mould.
define "L" as the effective hole length of the ring die.
define "D" as the effective hole diameter of the ring die.
the Compression Ratio = L / D.
The higher Compression Ratio, the more compact that the biomass sawdust wood pellet will be, and the pelleting speed will be reduced accordingly.
Ring die failure cause analysis
After a period of working, the hole inside wall friction losses increased,
A) the diameter of the hole increased, and the diameter of final product biomass wood sawdust pellet exceed the specified value.
B) the scraggly of the hole inside wall get worse, the wood sawdust raw material will easy to block, the capacity will decrease.
C) the thickness of the hole wall will be reduced, the structural strength of the ring die mould will be highly reduced.
number of reasons cause the ring die friction losses.
A) the fineness of the biomass wood sawdust powder raw material.
the more fine the raw material is, the more easier to make pellet.
otherwise, too coarse granular size of the raw material will increase the friction losses of the ring die.
Generally, all of the raw material partical size should be more than 8 mesh, the proportion of partical that above 25 mesh should not less than 65%.
for those high coarse fiber raw material, we should add some oil to reduce the friction, and the surface of the final pellet will look more smooth.
B) the impurity in the raw material will accelerate the friction losses. hence the raw material cleaning is very important.
C) the space between the press roller and the ring die mould.
It will speed up the friction if the space is too small. the ideal space is 0.2-0.4 mm.
the space selection will depend on the diameter of the pellet. smaller diameter, smaller space.
when we replace the ring die mould with a new one, the space should be set as lower value.
You may want to know those:
|Question 1||Are you trading or manufacturer?|
We are manufacturer with over 10years experience,we installed many lines oversea and China market.
|Question 2||where is your factory?|
our factory is located is JiangSu province,China,the birth-place of ring die pellet granulator.Almost all high quality granulator from China are produced in this province.
|Question 3||how to recognize different pellet granulator model?|
the model is defined based on diameter of ring die,for example,MZLH420 model means its ring die is 420mm
|Question 4||what kind of material is ring die?|
we have two kinds material,one is alloy steel with cheaper price,the other is SS with higher cost.
|Question 5||what is final pellet size?|
normally standard size are 6/8/10mm for wood pellets,feed pellet size range is big,from 1to6mm are available.
As the wood pellet granulator manufacturer,JLNE Promise those
|we provide installation drawing&pellet granulator operation manual|
|within 24working hrs if client has question|
for oversea helping
If need our technician to help install oversea,we act within 48working hrs.
Our pellet line in China is available at any time for your visit,capacity 2t/h~10t/h.
Pls tell your questions,JLNE Pellet Granulator are happy to serve&ready to be your business partner at 24/7!Office number 0086-18136656333.