Energy Saving Rice Husk and Wood Pellet Mill
|FOB Price:||US $38,000 / Set|
|Min. Order:||1 Set|
|Min. Order||FOB Price|
|1 Set||US $38,000/ Set|
|Payment Terms:||L/C, T/T, Western Union, Paypal|
- Model NO.: MZLH508
- Voltage: 380V
- Controlling Mode: Electric
- Certification: CE, ISO
- Customized: Customized
- Color: Multi Color
- Ring Die: 508mm
- Main Power: 132kw 8grade
- Force Feeding Motor: 1.5kw
- Pellet Density: 1.1-1.4G/Cm3
- Leadtime: 10days
- Transport Package: Export Standard Package
- Origin: China
- Type: Pellet Mill
- Automatic Grade: Automatic
- Energy Saving: Energy Saving
- Warranty: 2 Years
- Condition: New
- Trade Mark: Pellet Mill
- Roller: 2PCS
- Feeding Motor: 2.2kw
- Final Pellet: 6/8/10mm
- Free Spare Parts: Yes
- Trademark: JLNE Pellet Mill
- Specification: 3500kgs
- HS Code: 847480
Our pellet mill has been sold to over 20countries all over the world,with CE certificate,final pellet from our pellet mill strictly follow EN standard.
|work with raw material|
agricultural waste,like straw,rice husk,coffee husk ect.
|wood waste,like log,wood chips,shaving,wood skin,branch,sawdust,etc|
|pellet in 6/8/10mm diameter--a kind of biomass fuel,can replace coal or gas|
|MZLH Pellet Mill|
Introduction our rice husk and wood pellet mill:
|Technical data||1.capacity 1.5~2.2t/h|
2.main power 110/132kw
3.inner diameter of ring die 508mm
|Special from us||1.CE approved,gear-driving|
2.famous brand motor,imported bearing from Sweden
3.equip hoisting lift,since ring die need to change every 2or3months,this tool is helping to make work easily.
4.freely lubrication system on our pellet mill body,adding oil or grease is more convenience.
5.pellets cutting mechanism
6.with over-load protection system,protecing during pellet mill working
7.force-feeding part in SS material,after years working the body still in good condition.
8.using double-shaft feeding on top of pellet mill,so material will not stuck easily.
9.connect itself with cooling system,to reduce heat during machine working,prolong its service life.
|7working days in standard specification,15~20working days if customized.|
|in export standard,if FCL in nude,if LCL,in strong plywood case.|
|one 20'ft container load 2sets MZLH508 pellet mill,40'ft container load 4sets|
|2years except spare parts|
Final pellet advantages:
|pellets are an efficient source of heat with high combustion vablue,like pine is 4300-4500KA,olive wood will be 4500ka and straws are 3700-3800.|
|pellets are economically competitive with home fossil fuel options and electric heat.|
|pellets are a sustainable fuel source,the ash producing is lower than coal and log/firewood,except rice straws pellets(max8%),the other will be lower to 0.9%.|
|pellets are a biomass product made of wood waste or other forest waste. |
The raw materials can be waste pallets,veneer,branches,debarks and so on.
|pellets can be used in a lot of appliances such as stoves, furnaces, boilers and other heating systems.|
Service from us:
|Pre-sale service||1.provide customers the parameters and confirm technical data|
|2.share photos and video with clients |
|3.show customers around in our factory or in domestic customers pellet line workshop|
|On-purchase service||1.keep clients informed of the production process |
|2.send photos to clients before shipment for checking |
|3.arrange visa for engineers who will go for guide assembly|
|After-sale service||1.training and all-around technical guidance for operation,comission and maintenance |
|2.engineers abroad to for guide assembly |
|3.detailed drawings from front view,vertical view,side view|
Useful tips for running pellet mill
About the Compression Ratio of the ring die mould.
define "L" as the effective hole length of the ring die.
define "D" as the effective hole diameter of the ring die.
the Compression Ratio = L / D.
The higher Compression Ratio, the more compact that the biomass sawdust wood pellet will be, and the pelleting speed will be reduced accordingly.
Ring die failure cause analysis
After a period of working, the hole inside wall friction losses increased,
A) the diameter of the hole increased, and the diameter of final product biomass wood sawdust pellet exceed the specified value.
B) the scraggly of the hole inside wall get worse, the wood sawdust raw material will easy to block, the capacity will decrease.
C) the thickness of the hole wall will be reduced, the structural strength of the ring die mould will be highly reduced.
number of reasons cause the ring die friction losses.
A) the fineness of the biomass wood sawdust powder raw material.
the more fine the raw material is, the more easier to make pellet.
otherwise, too coarse granular size of the raw material will increase the friction losses of the ring die.
Generally, all of the raw material partical size should be more than 8 mesh, the proportion of partical that above 25 mesh should not less than 65%.
for those high coarse fiber raw material, we should add some oil to reduce the friction, and the surface of the final pellet will look more smooth.
B) the impurity in the raw material will accelerate the friction losses. hence the raw material cleaning is very important.
C) the space between the press roller and the ring die mould.
It will speed up the friction if the space is too small. the ideal space is 0.2-0.4 mm.
the space selection will depend on the diameter of the pellet. smaller diameter, smaller space.
when we replace the ring die mould with a new one, the space should be set as lower value.
You may want to know those:
|Question 1||Are you trading or manufacturer?|
We are manufacturer with over 10years experience,we installed many lines oversea and China market.
|Question 2||where is your factory?|
our factory is located is JiangSu province,China,the birth-place of ring die pellet mill.Almost all high quality pellet machine from China are produced in this province.
|Question 3||how to recognize different pellet mill model?|
the model is defined based on diameter of ring die,for example,MZLH420 model means its ring die is 420mm
|Question 4||what kind of material is ring die?|
we have two kinds material,one is alloy steel with cheaper price,the other is SS with higher cost.
|Question 5||what is final pellet size?|
normally standard size are 6/8/10mm for wood pellets,feed pellet size range is big,from 1to6mm are available.
As the manufacturer,JLNE Promise those
|we provide installation drawing&pellet mill operation manual|
|within 24working hrs if client has question|
for oversea helping
If need our technician to help install oversea,we act within 48working hrs.
Our pellet line in China is available at any time for your visit,capacity 2t/h~10t/h.
Pls tell your questions,JLNE Pellet Mill are happy to serve&ready to be your business partner at 24/7!Office number 0086-18136656333.